מצלמה Fuji Instax Mini LiPlay פוג'י זמין פוג'י פילם

צבע - INSTAX MINI LIPLAY

מחיר: 698 ₪

משלוח חינם

משלוח שבעה ימי עסקים בדאר רשום: 0 ₪

זמן אספקה: 7 ימים , קיימת אפשרות לאיסוף עצמי

למה לקוחות קונים אצלנו:

משלוח חינם משלוח חינם

קניה בטוחה

שאל אותנו על מוצר זה

Image sensor	1/5-in. CMOS with primary color filter
Effective pixels	2560 x 1920
Storage media	Built-in memory, micro SD / micro SDHC memory card (purchased separately)
Recording capacity	Built-in memory: approx. 45 files, micro SD / micro SDHC memory card: approx. 850 files per 1 gigabyte (without sound)
File system	Compliant with Design rule for Camera File system (DCF), Exif Ver. 2.3
Focal length	28 mm (35-mm film equivalent)
Aperture	F2.0
Auto focus system	Single AF (equipped with AF auxiliary illuminator)
Focus range	10 cm to ∞
Shutter speed	1/4 sec. to 1/8000 sec. (auto)
Sensitivity	ISO 100 to 1600 (auto)
Exposure control	Programmed AE
Exposure compensation	-2.0 EV to +2.0 EV (in increments of 1/3 EV)
Metering	256-segment through the lens (TTL) metering, multi-metering
White balance	Auto
Flash	Auto / Compulsory flash / Suppressed flash Effective range: approx. 50 cm to 1.5 m
Self timer	Approx. 10 sec. / Approx. 2 sec.
Image effects	frame and filter
Voice recording	Recordable and overwritable during image capture and playback per 1 image

Film	FUJIFILM Instant Film instax mini (purchased separately)
Photo capacity	10 prints per pack
Film size	86 mm x 54 mm
Image size	62 mm x 46 mm
Supported image size	800 x 600 dots
Printing solution	12.5 dots per mm (318 dpi, 80-µm dot pitch)
Printing levels	256 levels per color (RGB)
Supported image format	JPEG images captured with the device
Printing time	Approx. 12 sec.
Print function	Images on built-in memory / micro SD are printable
Reprint	Reprint up to the last 50 prints (up to 50 images stored in print history)

Smartphone app functions	Voice playback from print, smartphone image print, remote image capture, frame addition
LCD monitor	2.7-in. TFT color LCD monitor, Pixels: approx. 230K dots
External interface	Micro USB Micro-B (for charging only)
Power supply	Lithium-ion battery (built-in, cannot be removed)
Charging function	Built-in
Printing capacity	Approx. 100 prints (when battery is fully charged) * Varies depending on the conditions of use.
Charging time	Approx. 2 to 3 hrs. * Varies depending on air temperature.
Dimensions	82.5 mm x 122.9 mm x 36.7 mm (excluding protrusions)
Weight	Approx. 255 g (excluding fiim pack and memory card)
Operating environment	Temperature: 5℃ to 40℃ Humidity: 20% to 80% (no condensation)

חזרה למעלה